ESP32 Panel Platine
€19.95
Available, delivery time: 2-5 days
Product information "ESP32 Panel Platine"
- WiFi communication – 2.4 GHz – ESPNOW protocol
- Power supply via RJ45
- Dedicated signal line for the encoder in the RJ45 cable (the encoder signal is not transmitted via WiFi; a connection with an RJ45 cable to the PanelModule RJ45 port is required)
- Power supply possible via power bank
- Charging the power bank possible (with RJ45 connection to the OPEN-CNC-Shield 2)
- All inputs can be conveniently remapped in the ESP32 web interface software and used for other functions
- Various optional connection options:
- 4-pin 5V encoder
- 3-axis joystick with OK button (for zeroing axes)
- Motor Start/Stop button
- Program Start/Stop button
- Feedrate potentiometer (feed speed)
- Rotation Speed potentiometer (spindle speed)
- Autosquare button
- Axis selection X, Y, and Z (to select the axis for the encoder) No longer supported by Estlcam v12, but the inputs can be remapped in the software for other functions
- 4 free buttons (can be used, for example, for motor disable or Speed1/Speed2 functions)
- I2C connector, typically for a display
- ESP32 Panel board
Login
Passend dazu
This PanelModule is an expansion board for the OPEN-CNC-Shield 2. This module provides an RJ45 (LAN) interface for connecting a handwheel to the OPEN-CNC-Shield 2. The connection is currently used primarily to supply power to the handwheel. Technical Specifications: RJ45 connector Scope of Delivery: PanelModule Further Links: Documentation
With this control element set, you can build your own control panel for Estlcam or a CNC milling machine. Note: if you use pre-made enclosure designs, always pay attention to the size of each component. In my enclosure designs, I have included the Fusion360 file so the button, switch, and potentiometer sizes can be adjusted accordingly. More information in my blog post Scope of Delivery 1x 4-axis joystick 10K 2x Push buttons – 16mm stainless steel – white LED – 5V – on/off symbol (Program/Motor Start/Stop) – IP67 1x Push button – 16mm stainless steel – white LED – 5V – right angle symbol (Autosquaring) – IP67 2x Potentiometers – 10k Ohm 1x Latching switch – 16mm stainless steel – white LED – 5V (Motor disable or Speed1/2) – IP67 1x Display 128x64 – OLED 1x On/Off rocker switch Further Links Matching enclosure on Thingiverse Guide for this handwheel version