ESP32 Panel Integrated Battery Platine
€24.95
Available, delivery time: 2-5 days
Product information "ESP32 Panel Integrated Battery Platine"
- WiFi communication - 2.4GHz - ESPNOW protocol
- Power supply via RJ45 or USB-C
- Dedicated signal line for the encoder in the RJ45 cable (the encoder signal is not transmitted via WiFi. A connection via RJ45 cable to the PanelModule RJ45 is required)
- Power supply possible through 2 x 18650 batteries
- Charging electronics with safety cutoff for 18650 batteries
- Battery charging via RJ45 connection to OCS2 or USB-C
- All inputs can be conveniently remapped in the ESP32 web interface software and used for other functions
- Various optional connection options:
- 4-pin - 5V encoder
- 3-axis joystick with OK button (for axis zeroing)
- Motor Start/Stop button
- Program Start/Stop button
- Feedrate potentiometer (feed speed)
- Rotation speed potentiometer (spindle speed)
- Autosquare button
- Axis selection X, Y, and Z (to select the axis for the encoder) No longer supported by Estlcam v12, but inputs can be remapped in software for other functions
- 4 free buttons (e.g., for power-off function or Speed1/Speed2)
- Connection for I2C, typically for a display
- ESP32 Panel Integrated Battery Board
Commissioning:
Examples of wiring can be found in the documentation.
When new batteries are inserted, power must first be connected briefly via USB-C. Normal operation will then function afterward.
Login
Passend dazu
This PanelModule is an expansion board for the OPEN-CNC-Shield 2. This module provides an RJ45 (LAN) interface for connecting a handwheel to the OPEN-CNC-Shield 2. The connection is currently used primarily to supply power to the handwheel. Technical Specifications: RJ45 connector Scope of Delivery: PanelModule Further Links: Documentation
With this control element set, you can build your own control panel for Estlcam or a CNC milling machine. Note: if you use pre-made enclosure designs, always pay attention to the size of each component. In my enclosure designs, I have included the Fusion360 file so the button, switch, and potentiometer sizes can be adjusted accordingly. More information in my blog post Scope of Delivery 1x 4-axis joystick 10K 2x Push buttons – 16mm stainless steel – white LED – 5V – on/off symbol (Program/Motor Start/Stop) – IP67 1x Push button – 16mm stainless steel – white LED – 5V – right angle symbol (Autosquaring) – IP67 2x Potentiometers – 10k Ohm 1x Latching switch – 16mm stainless steel – white LED – 5V (Motor disable or Speed1/2) – IP67 1x Display 128x64 – OLED 1x On/Off rocker switch Further Links Matching enclosure on Thingiverse Guide for this handwheel version
ESP32 Devkit DOIT V1 USB-C or Micro-USB connection (depending on stock) Links: Blog post: Firmware for my products ESP32 Panel Flash Tool OPEN-CNC-Shield 2 ESP32 Flash Tool
With this control element set, you can build your own control panel for Estlcam or a CNC milling machine. Note: if you use pre-designed enclosures, always pay attention to the dimensions of the individual components. In my enclosure designs, I have included the Fusion360 file so the button, switch, and potentiometer sizes can be adjusted accordingly. More information in my blog post Scope of Delivery 1x Encoder/handwheel 1x 4-axis joystick 10K 2x Push buttons – 16mm stainless steel – white LED – 5V – on/off symbol (Program/Motor Start/Stop) – IP67 1x Push button – 16mm stainless steel – white LED – 5V – right angle symbol (Autosquaring) – IP67 2x Potentiometers – 10k Ohm 1x Latching switch – 16mm stainless steel – white LED – 5V (Motor disable or Speed1/2) – IP67 1x Display 128x64 – OLED 1x On/Off rocker switch Further Links Matching enclosure on Thingiverse Guide for this handwheel version